Axminster T-2000CK Provozní pokyny stáhnout pdf (Strana 9)

Assembly

Having unpacked the boxes, put all components where

they are readily to hand. Locate the motor assembly (1),

the upper and lower leg square tubes (2-3), cross support

brackets (4-5), leg connectors (6) and 5/16” button head

bolts (e).

1. Place the motor assembly (1) upside down on the ﬂ oor,

see ﬁ g 01. Locate the four upper leg square tubes (2).

Line up the holes in the angled end of the square tubes

with the pre-drilled holes in the mounting plates to each

corner of the fan assembly and secure using button head

bolts (e) and 5mm Hex key (27), see ﬁ gs 02-03-04.

Fig 01

Fig 02-03-04

Mounting plate

Pre-drilled holes

2. Locate the four leg bracket connectors (6) and lower

leg square tubes (3). Slide the connectors down into the

upper leg tubes (2), line up the lower four holes to sides

of the connector (6) with holes in the leg tube and secure

in place with button head bolts (e), see ﬁ g 05.

Fig 05

3. Insert the ends of each upper leg square tubes (3)

down over the leg bracket connectors (6) and line up the

pre-drilled holes, see ﬁ gs 6-7.

Fig 06-07

NOTE DO NOT SECURE AT THIS POINT!

Continues Over....

Pre-drilled holes

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Žádné komentáře

Axminster T-2000CK Provozní pokyny Strana 9