Axminster AWHBS350N Provozní pokyny stáhnout pdf (Strana 6)

Your saw is packed in the box partially assembled.

This is to ensure that the components are inserted

in the correct positions. e.g. The blade is ﬁtted, the

securing bolt for the tilt mechanism is inserted in

the tilt quadrant with the washer and the locking

butterﬂy nut threaded on to the bolt, etc.

Please make careful note of the positions of

the various components if you have cause to

disassemble, whilst putting the machine together.

Take all the easily removable items out of the box,

tip the box up so that the base of the saw is to the

ground, remove all the polystyrene packaging from

around the saw (open both sides of the box?) then

“corner walk” the saw out of the box.

If this is still awkward, split the top of the box, fold the

box material ﬂat on the ﬂoor, and “wriggle” the saw

off the cardboard. (The best method of moving the

saw is with a ‘hug’ lift through the neck of the saw,

holding the saw back against your body and lifting

by straightening your legs).

Cabinet Assembly

Step 1

Step 2

M6 x 12 bolts and washers

Base

Lightly tighten the M6 x12 bolts and washersAttach the two connecting plates

Support plate

Unpacking

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Žádné komentáře

Axminster AWHBS350N Provozní pokyny Strana 6