Axminster TSCE-12R Manuál s instrukcemi stáhnout pdf (Strana 9)

b) Selection of sawblade and riving knife: The operator should only select

sawblade of a dismeter and thickness suitable for the machine, as specified in the

appendix A.

c) Selectin of riving knife slot- The riving knife guiding slot should be no more than

0.5mm wider than the riving knife guiding elements.

d) Fixing of sawblade to spindle: Where the spindle diameter is less than the

sawblade bore diameter, flanged bushes provided by the machine manufacture

should be used to make up the difference. The use of loose rings or bushes is not

permitted.

e) Lighting: it is important to provide adequate lighting around the machine.

60. The TSEC - series table saw is designed with mounted separately from riving knife

type or mounted on riving knife type (only for saw-blade Ø＜ 315mm) saw guard,

be careful the saaw-blade size before any replacing.

61. Guide the workpiece along the rip fence and through the rotation saw blade, using

the push stick if necessary. Any damage, please replace new one that

specification according above drawing.

*Any other maintenance is welcome to be contacted manufacturer or our distributor.

for saw Blade ⌽>315mm for saw Blade ⌽<315mm only

- 9 -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Žádné komentáře

Axminster TSCE-12R Manuál s instrukcemi Strana 9